Kitchen lighting ceiling fixtures seem to be very difficult, however, it is not. Fixing ceiling lights in the kitchen yourself only needs a bit of initiative spark. I do never call up an electrician for a simple DIY task. Because you really need to be a pro for kitchen light fixing yourself.

Here is how you can do this in the easiest way to wire a light fixture in your kitchen.

Things You Need

So, first of all, we need some tools for the job are;

• Philips Head Screwdriver
• Flathead Screwdriver
• A Pair of Wire Cutters
• Needlenose  Pliers

The first thing you want to do before you actually start wiring the light fixtures is making sure the power at the wall is turned off.

What you can do when the light is still up. Actually, a loop circuit is a situation when you can see that the light is off but its possibly still be a live wire.

Ensuring Power Cut

So, in order to avoid any blunder, you need to have an electric power tester. It needs to have two little prong leads so that you can insert them without actually having to disconnect anything.

You need to insert the black lead into the black probe and the red lead into the white probe. If you can see that there is no light on, it means there’s no power there.

That’s the easiest way to ensure if the wire has no live electricity. This precautionary measure is a must-do thing as this will avoid any mishap you might face.

Now as you have tested your wires, and you can see that there’s no power going to it it’s now safe for you to go ahead.

Ceiling Light Fixtures

In the final step, you get the new wire up to the junction box. Now that site must be marked with a little white spot which would be showing you that this goes to your white wires.

And you will go ahead and mount that. So take the little wire nut off and now put that back on. When you’re doing this you want to make sure that you will feel it get tight.

Once it gets tight then you want to make sure by pulling on the wire that nothing is loose. Because you’re going to shut these back in the junction.

It would be irritating for you when you’re done and you get those wires pop out on you. This will undo all the workout and the light won’t work.

It may also possibly short out and cause a fire. So all you have to do is just make sure that it is properly attached and that none of those things will happen.

So again you take the wire nut and you put it on the other side or black liner. You just spin it until it’s nice and tight then check once again at the wire isn’t coming out, then you know you’re secure at that point.

For this, you’re going to take our wires and push them back up into your junction box there. Push the white wires back up into the junction box and then once again just go ahead and check and make sure everything looks wired and nothing’s loose.

Once you got that done you have now completed the wiring to your wiring project. This is how its simple and easy light fixtures in kitchens are.